Welcome to Kunshan Hao Run Precision Mold Co.,LTD

Chinese|English|Homepage/Favorites

_Precision stamping parts | Precision stamping die |CNC precision machining |  Mobile shield  | Sheet metal processing

_Precision stamping parts | Precision stamping die |CNC precision machining |  Mobile shield  | Sheet metal processing
Kunshan Hao Run Precision Mold Co.,LTD
Contact: Miss Su
Mobile: 15995651409
Tel: 0512-87882109
Fax: 0512-57037099
E-mail: suesu@hrjmmj.com.cn
Website: www.hrjmmj.com.cn
Address: No. 471 Road, Kunshan Development Zone Kunjia

News Center

Position:Homepage|Technical Knowledge

Numerical control bending machine operation flow in sheet metal processing

Author: ComeFrom: Date:2015/5/30 22:03:46 Hits:9322
     CNC bending machine in the process of sheet metal is divided into: bracket, working table and clamping plate three parts. When using the wire to the coil through the electric power, the pressure on the plate after the pull of gravity, and then complete the clamping between the plate and the base. In the know the use of method will feel the numerical control bending machine is very simple. Not much to say, we immediately come to know the use of numerical control bending machine:
     1, the first power, in the control panel to open the switch, and then launch the oil pump, when the oil pump to hear the change to do not have any operation.
     2, scheduling, the use of time it is necessary to pay attention to. Must pass inspection before bending work. On the upper mold down to the bottom of the bottom, it is necessary to have a plate of open space, otherwise the mold machine damage. The schedule of the trip has electric fast adjustment.
     3, the choice of the notch bending notch, usually choose the thickness 8 times the width of the. As the notch plate bending 4mm to 32 at the mercy of the.
     4, material adjustment is a fast adjustment and manual adjustment.
     5, foot switch start bending, CNC bending machine and CNC cutting machine is not the same, can at any time to release, release the foot will stop, and then continue down. CNC bending machine directly bending, without the need to splice, do not need to be slotted, do not need to use the electrode, it is not leaking out of the corner, it will be a technology welding machine operation, improve the quality, improve labor efficiency, reduce labor costs, shorten the production cycle of the product.
Contact: Miss Su  15995651409  Tel: 0512-87882109  Fax: 0512-57037099  E-mail: suesu@hrjmmj.com.cn
Website: www.hrjmmj.com.cn  Address: No. 471 Road, Kunshan Development Zone Kunjia
All rights reserved:Kunshan Hao Run Precision Mold Co.,LTD  Technical Support:KSGUOCHENG  Su ICP 15021490 
Link: Qimei electronic  Lenovo  BOE  Apple  ASUS